DIY Black Head Removal Strip-Try It Tuesday

Hello Everybody,

Today is Tuesday, and here I am with another episode of #tryittuesaday . So today I will be trying out DIY Black Head strip. This is a charcoal black and white head peel of strip and I am super excited and hopeful that I will work amazingly.

So lets gets started. Watch the video or keep reading:

Ok, so we need:

1. Non toxic glue ( please don't use the normal one)
2. Charcoal powder.

How to:
1. Squeeze in a little glue.
2. Add some charcoal power.
3. Mix well, if the mixture is black then you are fine, if grey then add more charcoal.
4. Give the area you want to apply the mixture on with a warm wet towel.
5. Pat dry.
6. Apply a medium layer and let them dry completely.
7. Once 100% dry , peel the strip off in upward direction.
8. And then the best part, closely observe your strip to see what all is there in it :)

So, if you watched the video then you know, I did it two times. First time I applied a very thin layer, it slipped off my skin but still pulled out some white heads.
Then I did a medium layer, it took 20 minutes to dry but dang! it got a lot, like a lot of white heads, even some really deep ones from my nose area.

My skin felt extremely soft , just like babies butt.
For it to work, just make sure:
1. You don't spread the mixture too thin or too thick.
2. Make sure to open your pores with hot water and dry completely.
3. The mixture should be fully dry before you remove it.

At the whole , it was a successful experiment , the DIY black head removal strip worked very well. Its a great home remedy to remove white and black heads, super economical.
Do give it a try.